PetroWrap 100 mm x 10,00 mtr – The quantity rolls – of one IMPA812472

  • -

PetroWrap 100 mm x 10,00 mtr – The quantity rolls – of one IMPA812472

SKU: 812472 Category:


PetroWrap Anti-Corrosion Tape
The PetroWrap Anti-Corrosion System has been developed for long term protection of metal surfaces that are underground, underwater, or exposed – even in the most severe environments.
It consists of a cold applied system of petrolatum-based PetroWrap Anti-Corrosion Tape, PetroWrap Primer, and, where contouring is necessary, PetroWrap Mastic. PetroWrap adheres to surfaces without heating, even on damp and/or indifferently prepared areas.

ISSA Code Width Length Weight (lb) Weight (kg)> Rolls/Box
81 24 72 100 mm (4″) 10 m (32.8′) 55 lb 25 18

The System
PetroWrap Primer Paste is a preparatory primer that displaces moisture, pacifies oxides, and fills small irregularities that occur on the surface to be wrapped with PetroWrap Anti-Corrosion Tape.
PetroWrap Mastic is a cold applied filler which profiles areas to be tape wrapped by easing contours on pipe joints, flanges, bolts, and other irregular shapes to be wrapped with PetroWrap Anti-Corrosion Tape.
PetroWrap Anti-Corrosion Tape consists of a non-woven, stitch bonded, synthetic fabric which has been fully impregnated with neutral petrolatum based compounds and inert fillers.
PetroWrap Overwrap is a 12 mm thick tough adhesive tape. It is available in 50 mm and 100 mm widths.
Can be applied on wire-brushed surfaces
Repels water, salt, alkalis and acids
Protects new or corroded surfaces
Temperature variances -40°C to +84°C
Will not crack, peel or harden
Non-toxic and environmentally friendly (Meets AWWA C217 Standard)
Steel pipes, flanges and valves
Welded pipe joints
Cooling tower piping
Pipe crossings
Tank bases
Waterproofing & sealing
Fire protection
Pipe & sprinkler systems
Electrical connection boxes
Cable splices
Hydraulic pipes, valves & fittings
Marine pilings
Application Instructions
Remove all contaminants such as dirt, oil, scale and excessive moisture.
Brush Petrowrap Primer A evenly over surface to displace remaining moisture and ensure proper adhesion.
Press Petrowrap Mastic B into surface irregularities to eliminate air pockets.
Wrap Petrowrap Tape C spirally around prepared surface using even tension. An overlap of 55% is recommended to assure total protection.
Finish with Petrowrap Overwrap D applied like Petrowrap Tape to prevent mechanical damage as required.


  • No categories